Filter
application methods
The pesticide application method you choose depends on the nature and habits of the target pest, the properties of the pesticide, the suitability of the application equipment, and the cost and efficiency of alternative methods. Your choice is often predetermined by one or more of these factors. Follow label direction for volume recommendations and application rates based on the pest to be controlled and utilize appropriate application tips on equipment.
- Inspect for entry points into the structure; holes in foundations, missing vents etc.
- Clean up yard area.
- Remove high weeds.
- Move wood piles up off ground.
- Trim scrubs away from foundations.
- Remove any unnecessary debris from yard that may provide harborage.
- Seal holes in foundations.
- Caulk cracks.
- Repair or replace broken vent plates.
- Repair doors, flashing in crawlspace or basement doors.
- Repair or seal any location it appears a snake came enter the structure.
- Remove food and water sources.
- Repair any water leaks in the crawlspace or around the foundation.
- Eliminate any rodent populations in or around the structure
Manufacturer Recommended Products And Treatment For Snakes Control
Pests need food, water, and shelter. Often the problem may be solved just by removing these key items. Before even thinking about chemical pest control, it is important to be aware of
Pest’s Conducive conditions & It’s Recommendations.
Pesticides can be purchased in many different forms, each form has specific uses and
| Conducive Condition | Recommendation | |
| 1 | Tree branches on house | Keep tree branches away from house to reduce pest access |
| 2 | Firewood next to foundation | Keep firewood away from house to reduce pest harborage |
| 3 | Debris on crawlspace/next to foundation | Remove wood debris to reduce termite ha rborage area |
| 4 | Excessive plant cover, stump, etc. | Providing spacing between plant cover and structure |
| 5 | Soil above the foundation Ii ne | Keep soil below top of foundation to reduce harbo rage areas |
| 6 | Wood-to-ground contact | Keep soil from touching wood to eliminate termite access |
| 7 | Debris on roof/full gutter | Keep gutter & roof free of debris to reduce insect harborage |
| 8 | Standi ng water near/under structure | Eliminate standing water to reduce pest harbo rage |
| 9 | Mo isture problem under structure | Increase ventilation to reduce pest harbo rage area |
| 10 | Openi ngs at plumbi ng & electronics | Seal opening to reduce pest access |
| 11 | Excessive gaps at windows/doors | Seal gaps to reduce pest access |
| 12 | Lea ky plumb ing fixtures | Repair to reduce moisture for pests |
| 13 | Keep garbage cans covered | Covered to reduce attraction of insects of vertebrate pests |
| 14 | Mo isture damage wood | Repair rotten or damaged wood to reduce insect harborage |
| 15 | Grocery bags stored improperly | Seal paper sacks in containers to reduce i nsect ha rborage areas |
| 16 | Pet food unsealed or left out | Keep pet food in sealed containers and unavailable to pests |
| 17 | Excessive storage conditions | Keep storage areas uncluttered and manageable |
| 18 | Debris below kick plates | Remove kick plates to reduce rodent harborage |
application methods The pesticide application method you choose depends on the nature and habits of the target pest, the properties of the pesticide, the suitability of the application equipment, and the cost and efficiency of alternative methods. Your choice is often predetermined by one or more of these factors. Follow label direction for volume recommendations and application rates based on the pest to be controlled and utilize appropriate application tips on equipment.
, these application methods are for informational purposes only. To know specific applications method/s for the product you buy, please refer actual packages for complete Label Verbiage.1 product
1 product
